Modifying your Competition Pro joystick to work with an Amiga computer can be a fun and rewarding project for retro gaming enthusiasts. One common modification involves replacing the joystick’s USB plug with a DB9 plug, which is the standard connector used by the Amiga.
Here is a simple example of using SHL shift instructions to track the steps during a sequence of traffic lights. The bits pattern stored in a byte will be shifted left and the sequential steps will be activated by the corresponding memory bits. The whole process is programmed in TIA Portal, simulated on the PLCSIM, with a WinCC control panel.
Implementation of full adder circuit in Verilog for the Basys3 board. Full adder circuit to add two 4-bit binary numbers.
A Full Adder is a logical circuit that performs an addition operation on three one-bit binary numbers. The full adder produces a sum of the three inputs and carry value. Here is a step by step explanation on how I approached this type of circuit in Python.
Two way traffic lights intersection with pedestrian walk cycle, coded in C# for microcontroller boards with ATmega328P chip.
One of the common issues with Astra K is the screen flicker. It is very expensive to fix and the dealers offer full unit replacement. It is fairly easy to fix it yourself.
Home Assistant integration with Zigbee and WiFi devices to allow full physical control over LED lamps with additional automation scripts. Using Philips HUE without the bridge via Conbee II gateway. Additional voice control over everything.
A small project of temperature controlled heater pads using ATMega microcontroller and relays.
This project is a simple example of DC motor control circuit using L293D driver. The main control board is UNO R3 with ATMega328P microcontroller. It is used to read data from water sensor and pass signals to L293D controller.
If you own LG 27GL850 and experience flickering issues while using integrated GPU on any frequency except 120Hz, you came to the right place.